What are the features of the H3C S5500 SI

The H3C S5500-SI Series Ethernet Switches include the following

models: S5500-28C-SI S5500-52C-SI, S5500-28C-PWR-SI and

S5500-52C-PWR-SI.,

H3C S5500-28C-SI/S5500-28C-PWR-SI has 24 Ethernet 10/100/1000

Base-T ports, 4 1000 BASE-X SFP (combo) and two expansion slots.

H3C S5500-48C-SI/S5500-48C-PWR-SI have 48 Ethernet 10/100/1000

Base-T ports, 4 1000 BASE-X SFP (combo) JG238A  and two expansion slots.

S5500-28C-PWR-SI/S5500-48C-PWR-SI model supports PoE, which

transmits Power over Ethernet to endpoint-devices.

Features:

Supports both IPv4 and IPv6

Full wire-speed, multi-layer switching

Excellent PoE (Power over Ethernet) Supply Function

H3C S5500-SI series supplies PoE function for endpoint devices, providing power over copper Ethernet cable to endpoint (Powered Device, such as IP phone, WLAN AP).

The H3C S5500-SI Series supports EAD (Endpoint Admission Defense), supports 802.1x authentication to identify users who attempt to access the network. supports Centralized MAC address authentication, which controls accesses to a network through ports and MAC addresses. supports the Guest VLAN function. Supports STP/RSTP and multi-VLAN based MSTP. Supports Smart Link to provide rapidconvergence. Supports H3C’s rapid ring protection protocol (RRPP). Support link-aggregation (including manual link aggregation and LACP), which is a simple and cost efficient way to expand the bandwidth of a switch port and balance the traffic among all the ports in a link aggregation.

Abundant QoS policies

The H3C S5500-SI Series supports L2~L4 complex flow classification based on source MAC address/destination MAC address/source IP address/destination IP address/ports/protocols.

The H3C S5500-SI Series supports flexible queue scheduling algorithms, which can be set on the basis of port and queue at the same time. They support Strict Priority (SP), Weighted Round

Robin (WRR) and SP +WRR.

The H3C S5500-SI Series supports Committed Access Rate (CAR) and limits the traffic speed at 64Kbit/s granularity.

The H3C S5500-SI Series supports packet redirection

The H3C S5500-SI Series supports remarking of 802.1p and DSCP priorities. Diversified System Configuration and Management Modes

The H3C S5500-SI Series supports Simple Network Management

Protocol (SNMP) v1/v2/v3 and RMON (Remote Monitoring) v1,

1/2/3/9 groups of MIBs, supports Command Line Interface (CLI), Web based network management, modem dial-up and Telnet, supports HGMP V2 cluster management.

After enabling HGMP V2, the network administrator can manage several member switches through one command switch and only the command switch needs a public network IP address. This can offer significant conservation of public JG239A  IP addresses and

increased network efficiency

More information, please view:http://www.h3network.com/5500-si-ei-hi-switch-price_c5
http://cisco2960.soulcast.com/