Question:
1, Does Cisco ws 1.3.6.1.4.1.9.1.1263 8fps-l WS-C2960S-48TS-L Price support VLAN and
LANE?
2, What is the minimum software for Cisco ws-c2960s-48fps-l?
3, Forget
the password of Cisco ws-c2960s-48fps-l, how to do?
Answer:
1, No.
2, The
minimum software is 12.2(50)SE.
SysObjectID
is 1.3.6.1.4.1.9.1.1263.
3, Use
console cable, execute RESET SAVE
Expatiation:
1 with the console line connected
to the switch, connected to the
switchthrough the super terminal or Secure CRT;
2 press and hold down the MODE key on the
panel switch, plug in switchpower supply;
3 about 40 seconds after release Mod
1 with the console line connected
to the switch, connected to the
switchthrough the super terminal or Secure CRT;
2 press and hold down the MODE key on the
panel switch, plug in switchpower supply;
3 about 40 seconds after release the Mode
key;
4 at this time will appear the following interface:
Swith: flash_init
Load_helper
Boot
Run the
flash_init command, and then enter the following command:
Rename flash:\config.text flash:\config.old
/ / name containing the password configuration file;
And then
enter the boot;
5 and then enter the
enable, you can directly enter privilege mode (because
this configuration file has no password and then input:
#rename flash:\config.old flash:\config.text
#copy flash:\config.text system:running-config
6 modify
the new password:
#configure terminal
#enable secret your new
password
7 save configuration: wre key;
More
information, please view: http://www.3anetwork.com
[Switch]gvrp (open global GVRP function) [Switch-ethernet1/1] GVRP (portGVRP)
Must first
open the global GVRP function, can open
the port function of GVRP(must be trunk port)
Configure
the GVRP timer
[Switch]grap timer leaveall (default 1000 seconds)
[Switch-ethernet1/1] GVRP timer {hold 10 |join WS-C2960S-24PS-L 20 |leave per second persecond 60 seconds}
More information, please view: http://www.3anetwork.com
没有评论:
发表评论